English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
Home
Solar Panel Stand Fixed Bracket for Ground PV Solar Power System
Basic Info
| Type | Roof Bracket |
| Wind Load | 60m/S |
| Snow Load | 1.4kn/M2 |
| Product | Solar Tracking Solar Mounting for Panel Install |
| Transport Package | Shrinking Film, Carton, Wooden Pallet or by Custom |
| Trademark | SP |
| Origin | China |
| HS Code | 76109000 |
| Production Capacity | 50000ton/Year |
Product Description
/Product Description/
1.Enables easy,fast and cost-effective installation.2. Flexible post spacing withstands different wind&snow loads.3. High quality material in galvanized steel or Aluminum and SUS 304.4. Highly corrosion resistant surface treatment.5. Screws and nuts go with every componts needed.6. Fasteners and rail nut fully configured to save extra parts purchasing.7. Mechanical calculation and reliability tested to ensure highset product quality.8. 12-25 years system and structural guarantee.
| Type: | Ground Solar Energy System Mounting Structure |
| Installation site: | According to Roof Type |
| Material: | Aluminum6063 T3-T5;Steel |
| Fasten material: | Aluminum |
| Survival Wind Speed: | < 60m/s |
| Design Snow load: | Up to 1.4KN/ Square meters |
| Solar panel type: | Framed or Frameless |
| Panel Orientation: | Transverse or vertical |
| Design Standard: | CE;IOS9001 |
| Quality warranty: | 12-25 years |
| Duration: | More than 20 years |
| Delivery time: | 7-15 days |
| Package: | Standard Packing |
/Material List for 20 Panels/
| NO. | NAME | SIZE(mm) | QTY | MATERIAL |
| 1 | Ground Screw | 10 | Q235B | |
| 2 | Front Column | 41*52*2.5 | 5 | Q235B |
| 3 | Back Column | 41*52*2.5 | 5 | Q235B |
| 4 | Rail | 41*52*2.5 | 10 | Q235B |
| 5 | Beam | 41*52*2.5 | 5 | Q235B |
| 6 | Connection | 8 | Q235B | |
| 7 | Hinge Joint | 10 | Q235B | |
| 8 | Mid Clamp | 8 | AL6063-T5 | |
| 9 | End Clamp | 4 | AL6063-T5 |
/Mounting Steps/
/Packaging & Shipping/
/Factory/
/Customer Visit/
/Cetifications/
/FAQ/
Q1: What is your MOQ?
A: 500kg for general products. More than 5 tons for new products.
Q2: Can you produce aluminum profiles by drawing?
We have professional engineer to design CAD drawing and establish mould according to customers' requirement.
Q3: What certification do you have? What's your standard?
A: We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.
Q4: What's the delivery time for samples and mass production?
A: (1). 2-3 weeks to open the new moulds and make free samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the order.
Q5: What's the packing way?
A: Commonly we use shrink films or kraft paper, also we can make as per customers' requirements.
Q6: What's the payment terms?
A: Usually by T/T, 30% deposit and the balance paid before shipment, L/C is also acceptable.
/Company Profile/
We are one of the professional manufacturer for the Aluminum products with 20 years experience in China. We supply over 15 countries and the United States. We do customer design and we also have a variety of ready-made products that you can choose from.
We have an excellent track record for producing Aluminum products that fit into your market and country. We do research and trends of each country to give you the best possible product that will sell in your country. We have been the gold supplier of International Committee Red Cross since 2012.
We will work hard to fit your maximum quantity orders. As we know this is very important. We will also organize and schedule all shipping to your office.
If you are interested, pls don't hesitate to contact us. We hope to be your valued supplier in coming future.
In order to help you get the right system, please offer the following necessary info:
1. Dimension of solar panels(length*width*thickness)?
2.Solar panels array?
3. Where to install (which kind of rooftop or ground)?
4. Tilt angle?
5. Any requirements about wind load and snow load?